Description
The Valken 8.4v – 9.6v NiMh airsoft battery charger is a smart charger for NiMh or NiCd batteries with 7-8 cells. The NiMh battery charger is easy to use, and charges airsoft battery packs at 600mA with a mini Tamiya connector. The airsoft battery charger plugs directly into a wall outlet, and a status LED lets you know when the battery pack is fully charged. The NiMh charger also comes with Delta Peak Detection, which automatically stops charging at a full charge, and switches to a trickle current of 200mA after 5 hours. They also come with reverse polarity and short circuit protection built in.
Always charge your new battery fully before its first use.
Plug the charger’s power into an appropriate wall outlet.
Connect the battery pack to the charger with the small Tamiya connector and make sure the polarity is connected in the right way. Then charging will start automatically.
After being connected correctly to the battery pack, the power LED will turn red, indicating that charging has begun.
Battery pack is at full charge when power LED turns green.
Disconnect battery pack from charger before unplugging the charger from the wall outlet.
Terminate charging immediately when any malfunction is observed.
FEATURES:
- Automatically stops charging at battery’s peak
- For 8.4v and 9.6v NiMh / NiCd Batteries
- Charges battery packs from 1000mAh to 5000mAh
- Small Tamiya Connector
- Status LED
- For NiMh / NiCd Batteries ONLY
SPECIFICATIONS:
- Compatibility: 8.4v and 9.6v NiMH Batteries (7-8 Cells)
- Connector Type: Small Tamiya
- Charge Rate: 600mA (Trickle Current of 200mA)
- Input Voltage: 100-240v AC
- Dimensions: 75mm x 52mm x 28mm
- Material: Polymer Case
- Package Includes: Charger and Manual
